Product Description
The AT-SP3X speaker has a sound quality design optimized for Audio-Technica’s analog products, such as phono cartridges and turntables. The signal picked up by the cartridge is faithfully reproduced as direct output sound. It also supports Bluetooth® connectivity. This allows you to enjoy the sound of vinyl wirelessly without worrying about having to wire the turntable and speakers together. The device is also multipoint compatible, so you can use your smartphone after listening to music on a turntable without having to re-pair. Since its founding in 1962, Audio-Technica has dedicated itself to the world of sound. This passion extends to all aspects of the audio signal path, from entry to exit.
Specially tuned to deliver rich, full-range audio
3′′ (76 mm) woofer and 1.1′′ (27 mm) tweeter are combined in an acoustically designed enclosure, and the sound quality is then specially tuned by using the built-in DSP. This delivers a flat, clear, and well-balanced sound. It can faithfully reproduce the sound of vinyl, especially when used with an Audio-Technica turntable. Since it can be connected via Bluetooth, you can also enjoy superior sound from your smartphone or tablet.
Impressive sound from compact bookshelf speakers
Despite its compact size of just 125 mm (4.9′′) wide × 200 mm (7.9′′) high × 136 mm (5.4′′) deep, it delivers a maximum output power of 30 W.
Tweeter grille helps produce well-balanced sound
A tweeter grille empowers the sound in the frequency band with strong directionality. The acoustic effect is enhanced to provide well-balanced sound for the entire room.
Bass reflex ducts for high-impact bass
A bass reflex duct on the rear side of the speaker is designed with the optimum dimensions for the enclosure. This duct produces high-impact bass regardless from any playback source, such as a turntable or smartphone.
Robust MDF material used for the enclosure
To suppress unwanted vibrations from the speakers themselves, the enclosure material is made of robust medium density fiberboard (MDF) material.
Simplified powered speaker setup does not require an external receiver/amplifier
No need to purchase additional devices or troublesome wiring.
Enjoy vinyl with the flexibility of wireless
This system allows you to enjoy the sound of vinyl from a Bluetooth-enabled turntable by simply installing speakers, without worrying about wiring. Bluetooth connectivity also allows for impressive sound from other audio sources such as computers, tablets, smartphones, and TVs.
Multipoint support for two simultaneous connections
Connect to both your smartphone and turntable at home at the same time, so you’ll never need to worry about switching devices again. You can use your smartphone after listening to music on the turntable without having to re-pair.
Wired connection compatible, play your vinyl just by plugging in
Enjoy the sound of vinyl at ease with both wired and wireless connectivity. Simply connect the audio (RCA) cable to your turntable and you’re good to go*.
*Audio (RCA) cables are not included with this product. A turntable or device with a phono equalizer output is required.
Intuitive operation with LED display that shows connectivity at a glance
After turning on the power button and making wireless/analog connections, you can enjoy intuitive operation with a simple volume knob. Speaker connection status can be determined at a glance through LED indications; power off: red, AUX IN: green (RCA), Bluetooth: blue, etc.
Minimalistic design that suits any room
The simple appearance fits anywhere in any room. The minimalistic design places the power button, volume control, and LEDs on the side.
Technical Specifications
- Speakers:
- Speaker Unit: 76mm 3" x 2
- Tweeter Unit: 27mm 1.1" x 2
- Frequency Response: 55 to 20,000 Hz
- Maximum Output: 30 W
- Communication Specifications:
- Communication System: Bluetooth Version 5.3
- Maximum RF Output: 10 mW EIRP
- Maximum Communication Range: Line of sight - approx. 10m (33')
- Frequency Band: 2.402 GHz to 2.480 GHz
- Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
- Spread Spectrum Method: FHSS
- Compatible Bluetooth Profile: A2DP
- Supported Codec: SBC
- Support Content Protection Method: SCMS-T
- Supported Sample Rate: 44.1 kHz, 48 kHz
- Supported Bit Depth: 16 bit, 24 bit
- Transmission Band: 20 to 20,000 Hz
- Other:
- Input Jack: Analog audio input terminals (RCA pin plug x 2)
- Speaker Cable Length: 2.0 m (6.6')
- AC Adapter Cable Length: 1.2 (3.9')
- Power Supply: 100 to 240 V AC / 18 V DC (using included AC adapter)
- Dimensions (excluding protrusions): H 200 mm (7.9") x W 125 mm (4.9") x D 136 (5.4")
- Weight:
- Left Side: Approx. 1.5 kg (3.3 lbs)
- Right Side: Approx 1.6 kg (3.5 lbs)
- Operating Temperature: 5°C to 40°C (41°F to 104°F)
