Pro-Ject Debut Evo 2 Belt Drive Turntable, RCA (Satin Fir Green)

Improved Tonearm Bearing Block & Counterweight

The tonearm pivot assembly might look familiar. It now uses the same bearing block as Debut PRO B. The additional mass draws unwanted resonance away from the armtube & cartridge. It also provides a more stable anchor for the tonearm’s pivot. The anti-skating scale at attached to the bearing block too, making it quite a bit easier to work with. We reduce resonance to an even greater degree with a TPE-damped counterweight. These improvements along with the carbon fiber tube & ABEC 7 ball/race bearing provide effortless tracking with no friction, allowing all the micro-detail through.

Improved Record Platter

Another implement that comes courtesy of the Debut PRO B & XA B turntables, this has quickly become one of our favorite vinyl record platters. 1.7kg (3.75 lbs) heavy, the platter is CNC-machined from aluminum. Additional machining is applied in the precision-balancing process, which ascertains the platter is completely steady & even as it rotates. To eliminate any potential for unwanted resonance created by the metal material, we’ve machined a ridge into the underside of the platter & filled it with TPE (thermoplastic elastomer). This mutes any potential ‘ringing’ effect. Adding the cutout & TPE to the periphery of the platter also heighten the ‘flywheel effect,’ or rotational stability. Last & certainly not least, the use of aluminum instead of steel makes way for any and all moving coil phono cartridges. Since MC cartridges use much stronger magnets than do moving magnet cartridges, some MCs had potential for magnetic interaction with the steel platter supplied with the Debut Carbon EVO. This risk is now off the ‘table (pun intended).

The new Pick it MM EVO

The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.

Fit & Finish

The audio junction box is now flush with the bottom of the MDF plinth for a cleaner aesthetic. We’ve also added the alluring new ‘Red Wine’ finish to the satin-painted offerings. All other finishes remain intact. Satin finishes are ‘red wine,’ black, blue, green, white, yellow & real-Walnut wood veneer. Gloss finishes are black, white & red. All painted finishes are done by hand using an 8-coat process before finishing.

Audiophile Carbon Fiber Tonearm

The Debut EVO 2 features a premium 8.6″ carbon fiber armtube with a massive aluminum bearing block that draws resonance away from the cartridge. The ABEC-7-rated main tonearm ball/race bearing guarantees precise, stable and accurate tracking across a record side. The gimbal bearing uses 2 lateral stainless steel tips & thrust pads for smooth motion in the vertical plane. The carbon fiber tube is highly rigid, relatively light & anti-resonant in nature. The one-piece armtube/headshell design further prevents unwanted resonance and offers an ideal physical pairing with the supplied phono cartridge.

‘Adaptive anti-skating’ means that the anti-skate force increases across a record side. Due to progressively varying conditions from the outer to inner record grooves, skating force itself too increases as the arm traverses the record. Viewed thusly, it only makes sense that a decent anti-skating system adapts with it.

Sophisticated DC/AC Generator

Our turntables use switch-mode power supplies for good reason. They take the unrefined AC power from your wall and convert it to DC. That DC power is then fed to a DC/AC generator within the turntable, which in turn powers the AC motor. The advantage is that a completely new sine wave is created by the generator, fully decoupling your turntable from the dirty AC power coming from your outlet. This amounts to steady power being fed to the motor thereby enhancing speed stability.

Sweet Isolation Feet

Decent isolation feet are imperative to the performance of a hi-fi turntable. They’re responsible for preventing all manner of external vibration & resonance from getting back to the highly-sensitive phono cartridge. We use 3 height-adjustable feet for easy leveling & optimal stability on any surface. The metal columns are CNC-machined with cutouts for and Damp it isolation pods. The pods are made of a purpose-selected variety of TPE (thermoplastic elastomer). They’re highly effective at absorbing everything from footfall vibration to resonance created by your speakers.

True Balanced – Get Blown Away

Debut EVO 2 comes equipped with a balanced-capable RCA/ground phono output. It can be run balanced with an RCA > mini XLR phono cable and a balanced phono stage that has a mini XLR input (Phono Box S3 B, Phono Box DS3 B, Tube Box DS3 B). The turntable ships with an RCA/ground > RCA/ground phono cable for maximum compatibility out of the box (unbalanced dual single-ended RCA/ground is by far the most common connection type in phono). Balanced add-ons are sold separately. Browse options for balanced phono preamps & cables in the reel below!

*Excluding turntables with built-in phono preamps.