Product Description
Innovative, 31-band high-precision lossless PEQ
The K19 features DEL (Dual Engine Limiter) technology, and through proprietary algorithms, the K19 can apply various audio effects such as dynamic range compression (DRC) and dynamic range enhancement (DRE) as well as an advanced limiter to prevent clipping. Also on the K19 is an adjustable 31-band high-precision lossless PEQ*, which supports direct adjustment of PCM 44.1k-192k audio signals without resorting to sampling rate conversion (SRC). For each band, the gain can be adjusted between a range of +12--24dB and the Q value can be adjusted between a range of 0.4dB~128dB. And the PEQ curves don't have to be used only by you - PEQ presets on the K19 can be shared between users. Being able to import and export PEQ presets opens up a whole new dimension to sound adjustment!
*PEQ adjustment is supported on Windows and Mac computers, as well as with the mobile control app
ADI ADSP-21565 with SHARC+ core
For the first time in an FIIO product, the K19 flagship desktop DAC and headphone amplifier utilizes an ADI ADSP-21565 DSP chip with the SHARC+ core backed by a custom ultra-low phase noise femtosecond crystal oscillator. This DSP chip featuring a high clock frequency of 800MHz and capable of 64-bit double precision floating point calculations is what makes the 31-band high-precision lossless PEQ possible in the K19. The ADI DSP chip not only ensures that audio signals after PEQ adjustment are of high quality and with minimal distortion, it also helps to enable powerful system protection functions that safeguard both the K19 and the other devices and headphones connected to it.
Flagship ESS 8-channel | ES9039SPRO*2 DACS
Inside the K19 are two of the new ESS 8-channel ES9039SPRO DAC chips, featuring the fourth generation 32Bit HyperStream architecture and capable of ultra-high dynamic range with ultra-low noise. These DAC chips allow the K19 to output clearer and richer audio with plenty of detail.
8-channel THX AAA 788+ headphone amplifier
The K19 features a new headphone amplifier design consisting of an 8-channel THX AAA 788+ headphone amp architecture working together in parallel and backed by a high-voltage power supply. The THX amp chips are connected in parallel via 2×2 groups to make up a totally balanced, 4-channel amplification system. The result is enhanced transients, and high-power output up to 8000mW+8000mW with a 320 load - allowing the K19 to drive all kinds of headphones with ease.
Dual ACCUSILICON high-performance ultra-low phase noise femtosecond crystal oscillators
The K19 employs two industry-leading ACCUSILICON AS318-B ultra-low phase noise femtosecond crystal oscillators (45.1584MHz, 49.1520MHz), which are 100% pre-screened before being selected for use in the K19. These femtosecond crystal oscillators effectively reduce the impact of phase noise on audio signals and allow for accurate audio restoration and different sampling rates - resulting in purer and more stable sound no matter the source sampling rate.
Fully balanced design
The K19 processes audio signals through a fully differential chain - from the dual DACs, to the I/V conversion, to the low-pass filtering, and finally to the balanced headphone amplifier to ensure high dynamics and minimal crosstalk. Also, various parts of the audio circuits such as the IV, LPF, and preamplifier use multiple precision op-amps including the OPA2211 and the OPA1602 to ensure the K19 outputs stable, high-quality sound.
High-quality digital audio processing architecture
For the first time in an FIIO product, the K19 utilizes a powerful quad-core FPGA as a high-definition digital signal processing center. The FPGA is responsible for handling all incoming digital signals, including Bluetooth reception and decoding, USB decoding, coaxial and optical decoding, HDMI/ARC decoding, and DSP digital signal processing. These digital signals are directly transmitted through two sets of I2S channels to the dual ES9039SPRO DACS, ensuring minimal distortion and loss of audio signals in the digital audio processing chain.
New flagship, ultra-thin die-cast unibody shock- proof construction
The K19 comes with a brand new styling, made of a die-cast unibody aluminum alloy body for a totally seamless design. The aluminum alloy body is carefully polished by a multi-axis CNC machine to a quality befitting of a flagship. This aluminum alloy body not only features reduced thickness, but is also capably shock-proof. And when paired with the included stand, the K19 is simply stable!
A new HiFi direction, supports HDMI/ARC
HDMI IN and ARC capabilities are present in an FIIO desktop DAC and amp for the first time. The K19 supports decoding from HDMI2.0 input, HDMI output and HDMI ARC audio return channel functionality, opening the doors to a new way of experiencing an immersive audiovisual experience.
HDMI decoding/output: supports up to 192kHz/24bit sampling rate HDMI ARC: supports 44.1/48kHz sampling rates
Separated and shielded circuit boards
The digital and analog audio circuits of the K19 lie on separate boards for full isolation and greatly reduced interference. There are metal shields for the DSP board, DAC board, and the THX head-phone amplifier board, as a result of the digital board and module board adopting a compartmentalized aluminum alloy isolation design. These measures all help to minimize crosstalk to ensure signal purity. In addition, the honeycomb-mesh aluminum alloy body can also help to further reduce external interference, allowing you to enjoy pure, clean music.
Multi-stage analog power supply
The K19's analog audio circuit is powered by a multi-stage power supply. The numerous stages of the analog power supply mean that there are power control circuits for the digital-to-analog conversion, LPF, preamplifier, headphone amp and other audio circuit stages. Each stage uses a large number of precision LDOs for secondary voltage stabilization to ensure continuous pure clean power.
Dual internal and external heat dissipation, high energy coolly output
The K19's internal heat dissipation system consists of thermally conductive material being in contact with the chips inside, which transfers the heat from the chips to the thermally conductive material and finally to the aluminum alloy outer frame. In addition, the thermally conductive aluminum alloy body features a honeycomb mesh design, which allows for convection heat dissipation. The internal and external heat dissipation systems of the K19 allow the machine to consistently output high power without the user worrying about heat issues.
Six operating modes
- USB decoding - the XMOS 16-core XU316 enables decoding up to 768kHz/32bit, DSD512, MQA full decoding
- Optical input - capable of receiving optical input, for use as an optical decoder
- Bluetooth input - the Qualcomm QCC5125 enables support for aptX HD/aptX Adaptive/LDAC codecs
- Coaxial input - capable of receiving coaxial input, for use as a coaxial decoder
- HDMI input - supports audio input from devices such as video game consoles/Blu-ray players/ set-top boxes
- HDMI ARC - supports audio return from TVs and other devices
Four analog output + two digital output
- PO+PRE OUT (default position): front headphone out+rear audio out (volume adjustable)
- PO: audio output only from the front headphone jack (volume adjustable)
- PRE OUT: audio output only from the rear connectors (volume adjustable)
- LO: audio output only from the rear connectors (fixed level output)
- COAXIAL: standard RCA connectors, digital output
- OPTICAL: standard toslink connectors, digital output
Key Features
- 31-band high-precision lossless PEQ
- 8000mW+8000mW powerful output
- ESS 8 channel flagship DAC ES9039SPRO*2
- 8 channel THX AAA 788+
- High performance ultra-low phase noise femtosecond crystal oscillator
- Global clock management
- Ultra-thin die-cast unibody shock-proof construction Fully
Technical Specificaitons
- Name/Model No.: K19
- Hardware Solution:
- DAC: ES9039SPRO*2
- USB: XMOS XU316
- Bluetooth Decoding: QCC5125
- AMP: 8-way THX788+
- Working Mode:
- USB DAC mode
- Coaxial decoding mode
- Optical decoding mode
- HDMI decoding mode
- HDMI ARC decoding mode
- Bluetooth receiving mode
- Color: Black
- Weight: About 1800g
- Dimensions: About 250x225x36.7mm
- Volume Control Type: Knob/Remote control
- MQA: Support MQA global decoding
- Drive-free Mode (Switch Mode): Supported
- Gain: Ultra high gain/Super high gain/High gain/Medium gain/Low gain
- Bluetooth Reception (5.1): SBC/AAC/aptX/aptX LL/aptX HD/aptX Adaptive/LDAC
- Display: 1.30-inch TFT (240*240) fully laminated screen
- Display Status Indication: Volume, gain, output mode, working mode, transmission format, sampling rate, EQ, etc.
- Bluetooth Format Indication: Supported
- Sample Rate Indication: Supported
- FIIO Control: Supported
- Firmware Upgrade:
- System firmware: upgrade through front panel USB interface
- XMOS firmware: upgrade via front or rear panel USB interface
- Bluetooth Firmware: Upgrade via FIIO Control
- Remote Control: Supports infrared remote control (only the delivered remote control is supported)
- Sample Rate Indication (Knob Indicator Light):
- Blue: 44.1/48kHz
- Yellow: 88.2/96/176.4/192/352.8/384/705.6/768kHz
- Green: DSD64/128/256/512
- Magenta: MQA
- Maximum Supported Sampling Rate:
- USB decoding: up to 768kHz/32bit; DSD512 (Native)
- Coaxial input decoding: up to 192kHz/24bit; DSD64
- Optical input decoding: up to 96kHz/24bit
- Bluetooth Format Indicator (Knob Indicator Light):
- Blue: SBC
- Cyan: AAC
- Purple: aptX/aptX LL
- Yellow: aptX HD
- Green: aptX Adaptive
- White: LDAC
- Adaptation Impedance:
- PO: 8~150Ω
- BAL: 8~350Ω
- Power Parameters:
- Power supply: Support AC 100-240V~50/60Hz; DC 15V/≥3A (choose one of the two)
- Battery capacity: None
- Headphone Output (6.35mm, Ultra High Gain Mode) Performance Parameters:
- Output Power 1: L+R≥4000mW+4000mW (16Ω, THD+N＜1%)
- Output Power 2: L+R≥2300mW+2300mW (32Ω, THD+N＜1%)
- Output Power 3: L+R≥270mW+270mW (300Ω, THD+N＜1%)
- Output Impedance: ＜0.6Ω (32Ω)
- Crosstalk: ≥75dB (1kHz@32Ω)
- THD+N: ＜0.0003% (1kHz/-6dB@32Ω)
- Noise Floor: <3.5μV (A-weighted)
- SNR: ≥127dB (A-weighted)
- Frequency Response: 20Hz20kHz: Attenuation <0.2dB, 20Hz80kHz: Attenuation＜3dB
- Peak Output Voltage: ＞22.5Vp-p
What's Included
- Quick start guide
- Warranty card
- AC power cord
- Type-C to USB-A adapter
- 6.35mm adapter
- stand (color-matching with main unit)
- Vertical headphone stand support (color-matching with main unit)
- Screwdriver
- Metal XLR4 dust cover (pre-installed)
- Feet stands
- Screws
- USB2.0 data cable
- Dual Type-C data cable
- 3.5mm audio cable
- Infrared Remote Control
