Product Description
FLAT DESIGN, HIGH SOUND QUALITY
Simple positioning, an unparalleled lean and robust design and exceptional sound qualities turn the boundary microphone TG D71 into the consummate companion on stage, in rehearsal rooms or in home studios. The microphone takes sound quality to the next level when it is used on kick drums and cajóns. Well-considered features like the helpful status LED and the rubber underside enhance the microphone’s emphatic design. Its simple handling is also reflected in the sound itself: Painstaking fiddling with the equalizer becomes a thing of the past when the TG D71 is put to use.
CONVINCING PERFORMANCE
The TG D71 is your ideal choice if you plan to record percussion instruments – high impulse fidelity, an extremely appealing attack and a maximum sound pressure level of 148 dB. The condenser microphone reaches the top of its game when it is used with everything from kick drums and cajóns to grand pianos.
CLEVER DETAILS
The microphone’s lean, timeless design is both a technical and optical marvel. A red status LED glows when phantom power is used and indicates the microphone’s ready-to-speak status. The microphone comes with a bag that can be used to safely transport it wherever you go. Thanks to the rubberised underside, the boundary microphone always remains in the position that you want. An assembly fixture that can be used for extended or long-term installation is located on the underside.
MADE IN GERMANY
SOUND CHANNELLING TECHNOLOGY
Key Features
- An extremely tough housing with a compact, lean design
- Perfect for kick drums, cajóns and grand pianos with a non-slip rubber underside
- Powerful, natural sound
- Made in Germany
Technical Specifications
- Transducer type: Condenser (back electret)
- Operating principle: Pressure gradient
- Polar pattern: Half-cardioid
- Frequency response: 25 - 20,000 Hz
- Open circuit voltage: 1.5 mV/Pa (-56 dBV)
- Nominal impedance: < 200 Ω
- Load impedance: ≥ 1 kΩ
- Max. SPL at 1 kHz: 148 dB [SPL@1% THD]
- Signal-to-noise ratio:
- 63 dB [A, RMS]
- 50 dB [CCIR, Q-Peak]
- Noise voltage:
- 1.1 µV [A, RMS]
- 4.9 µV [CCIR, Q-Peak]
- A-weighted equivalent SPL: 31.2 dB
- Polarity: Positive pressure produces positive voltage on pin 2 in relation to pin 3
- Wiring: bal. with 3-pin XLR male
- Connection: XLR, 3-pin, male
- Power supply (Phantom power):
- P48 (+48 VDC ±4 VDC, 6.8 kΩ ±20%, current consumption: < 3.2 mA)
- P24 (+24 VDC ±4 VDC, 1.2 kΩ ±20%, current consumption: < 3.2 mA)
- P12 (+12 VDC ±4 VDC, 680 Ω ±20%, current consumption: < 3.2 mA)
- Dimensions without connector (L x W x H): 90 x 86 x 27 mm
- Weight: 413 g