Product Description
The VM520EB/H Headshell and Cartridge Combo Kit from Audio-Technica includes the VM520EB elliptical bonded dual moving magnet cartridge pre-mounted on the AT-HS10BK universal 1/2"-mount headshell. The VM520EB features dual magnets that are positioned to match left and right channels in the stereo record groove and provide an increase in channel separation and an extended frequency response. Additionally, the cartridge employs an elliptical bonded stylus to track the record groove with high accuracy for high-quality audio reproduction.
The lightweight AT-HS10BK is a universal 1/2"-mount headshell designed for 4-pin turntable cartridges. The die-cast aluminum body is designed to minimize vibration and provides a finger-lift at the front position to enable precise placement of the stylus onto the record. The gold-plated lead wires offer lossless signal transmission. The headshell ships with mounting hardware.
Key Features
- VM dual-magnet cartridge with 0.3 x 0.7 mm elliptical stylus
- Aluminum cantilever
- Paratoroidal coils improve generating efficiency
- Center shield plate between the left and right channels reduces crosstalk
- Durable low-resonance polymer cartridge housing
- Universal 1/2"-mount headshell for 4-pin turntable cartridges
- Includes VM520EB Cartridge
- Includes AT-HS10BK Headshell
- VM Dual Magnet for Matched Left & Right
- Increased Channel Separation
- Frequency Response: 20 Hz to 23 kHz
- Lightweight Aluminum Headshell
- Gold-Plated Lead Wires
- Reduces Vibration
- Precise Stylus Placement with Lift
Technical Specifications
- Frequency Response: 20 - 23,000Hz
- Channel Separation: 27dB (1kHz)
- Vertical Tracking Angle: 23˚
- Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
- Stylus Construction: Bonded Round Shank
- Recommended Load Impedance: 47,000Ω
- Coil Impedance: 2,700Ω (1kHz)
- Output Voltage: 4.0mV (1kHz, 5cm/sec.)
- Output Channel Balance: 1.5dB (1kHz)
- Stylus Shape: Elliptical Bonded
- Cantilever: Aluminium Pipe
- Static Compliance: 35 x 10-6 cm/dyne
- Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz)
- Mounting: 1/2” centres
- Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
- Recommended Load: Capacitance 100 – 200pF
- Replacement Stylus: VMN20EB
- Stylus Size: 0.3 x 0.7 mil
- Type: VM Type
- Weight: 16.8g
What's Included
- Audio-Technica Consumer VM520EB/H Headshell and Cartridge Combo Kit with VM520EB and AT-HS10BK
- 4 x Installation Screws
- 2 x Washers
- 2 x Hexagon Nuts
