This phantom-powered cardioid condenser boundary microphone features a 3-pin XLR output connector with a capacitive touch switch that enables local muting of the microphone.
Designed for clear, highly intelligible conferencing, recording, monitoring and other demanding sound pickup applications, the ES947C/FM3 mounts unobtrusively in tabletops or panels, but includes a highly visible two-state RGB LED ring (7 selectable colors + OFF) to indicate mute status.
The microphone’s cardioid polar pattern provides a 120° pickup angle. A rugged all-metal case with a two-layer steel mesh grille protects the microphone element, while our UniGuard® RFI-shielding technology provides outstanding rejection of radio frequency interference (RFI).
The ES947C/FM3 is equipped with a self-contained power module, eliminating the need for an external one, and comes with a pair of rubber isolators for optional mechanical isolation from the mounting surface.
Key Features
- Designed for surface-mount applications such as conferencing, recording, monitoring and other demanding sound pickup applications
- Capacitive touch switch enables local muting of the microphone
- Highly visible two-state RGB LED ring (7 selectable colors + OFF) indicates mute status
- Low-profile element provides uniform cardioid polar pattern with 120° acceptance angle
- Mounts unobtrusively in tabletops and panels
- Self-contained power module with 3-pin XLR output connector
- Rugged all-metal case with a two-layer steel mesh grille
- Rubber Isolators provide mechanical dampening of mounting-surface vibration
- Requires 11V to 52V DC phantom power
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
Technical Specifications
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 70-15,000 Hz
- Open Circuit Sensitivity: -37 dB (0 dB = 1V/Pa, 1 kHz)
- Output Impedance: 60 ohms
- Maximum Input Sound Level: 134 dB SPL (1 kHz at 1% THD)
- Dynamic Range: (typical) 110 dB (1 kHz at max SPL)
- Signal-to-Noise Ratio: 70 dB (1 kHz at 1 Pa, A-weighted)
- Phantom Power Requirements: 11-52V DC, 2 mA
- Weight: 59 g (2.1 oz)
- Dimensions: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 84.8 mm (3.34") H
- Output Connector: 3-pin XLRM-type
What's Included
- Rubber isolators (two types)
- Nuts
