• The System 10 offers full-bandwidth, 24-bit/48 kHz digital audio with none of the audio artifacts associated with analog companding.

Automatic Frequency Selection

• Just power up the components, and the receiver automatically seeks out a clean frequency and pairs up with the transmitter, saving you the hassle of scanning and syncing.
• While in use, the system continually monitors activity in the 2.4 GHz Wi-Fi range and automatically switches to a clean frequency to avoid interference if necessary.

Lightweight, Portable Receiver Chassis

• The tabletop receiver chassis features a lightweight, plastic housing designed to let you stack multiple receivers on top of each other for convenience.
• The chassis' front-panel LEDs show pairing statuses and warn you if the transmitter's input level is set too high and causing distortion.
• A System ID number display indicates which transmitter is associated with a given receiver.
• Rear-panel connections include balanced XLR and unbalanced 1/4" output connections as well as an output level control.

Lightweight Bodypack Transmitter

• The transmitter is housed in lightweight, plastic chassis equipped with a Hirose 4-pin locking connector and a belt clip.
• An internal input trim control can be set, using the included screwdriver, to match the sensitivity of your microphone or audio source for distortion-free input.
• With just a quick press, the power switch on the transmitter doubles as a mute function— great for silent instrument swaps. This function can be locked out to prevent an accident.

Pairing Multiple Transmitters

• With this peer-to-peer system, the transmitter can only transmit to one receiver at a time. However, up to 8 transmitters can be paired with the receiver ahead of time. This is useful in situations when you use multiple instruments during a show (one at a time, each with its own bodypack transmitter) and you need them ready to go. All you'll have to do is turn one transmitter off and the next one on.

• Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
• Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
• Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.

For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.

2.4 GHz Wi-Fi Band

• Unlike traditional analog wireless systems, the System 10 operates in the 2.4 GHz ISM band, away from interruptions and dropouts caused by TV and radio channel interference.

• For Guitar & Bass Players
• Bodypack Transmitter & Instrument Cable
• Triple-Diversity Tabletop Receiver
• 7-Hour AA Batteries
• Fixed Antennas
• Expandable to 8 Mic Channels/100' Range

Technical Specifications

• Overall System
  
  • Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
  • Frequency Response:
    • 20 Hz to 20 kHz
    • Depending on microphone type
  • Operating Range: 30 m (100') typical Open range environment with no interfering signals
  • Total Harmonic Distortion: <0.05% typical
  • Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
• Handheld Transmitter
  
  • RF Power Output: 10 mW
  • Spurious Emissions: Following federal and national regulations
  • Battery Type Two 1.5V AA (not included)
  • Battery Life >7 hours (alkaline) Depending on battery type and use pattern
  • Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
  • Net Weight: 280 grams (9.9 oz) without batteries
• Body Pack
  
  • RF Power Output: 10 mW
  • Battery Life >7 hours (alkaline) Depending on battery type and use pattern
  • Battery Type Two 1.5V AA (not included)
  • Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
  • Input Connections:
    • Four-pin Locking Connector
    • Pin 1: GND
    • Pin 2: INST INPUT,
    • Pin 3: MIC INPUT
    • Pin 4: DC BIAS +9V
  • Net Weight: 100 grams (3.5 oz) without batteries
  • Spurious Emissions: Following federal and national regulations
• Receiver
  
  • Receiving System: Diversity (frequency/time/space)
  • Maximum Output Level:
    • XLR, balanced: 0 dBV
    • 1/4" (6.3 mm), unbalanced: +6 dBV
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
  • Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
  • Dimensions: 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
  • Weight: 290 grams (10.2 oz)

What's Included

• Audio-Technica ATW-1101/G System 10 Digital Wireless Guitar (2.4 GHz)
• Audio-Technica ATW-R1100 System 10 Digital Tabletop Wireless Receiver (2.4 GHz)
• Audio-Technica ATW-T1001 System 10 Digital Wireless Bodypack Transmitter (2.4 GHz)
• Audio-Technica AT-GCW - Instrument & Guitar Cable for Wireless Transmitter
• AC Power Adapter