Product Description
The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.
The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Key Features
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- Motor features a speed-sensor system to maintain accurate platter rotation speed
- Fully manual operation
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminum platter with rubber mat
- AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
- AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
- Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
- Built-in switchable phono pre-amplifier for phono or line-level output
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
Technical Specifications
- Type: 2-speed, fully manual operation
- Motor: DC servo motor w/speed stability control
- Drive Method: Belt drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminium
- Wow and Flutter: 0.15% (WTD) @ 3 kHz (JIS)
- Signal-to-Noise Ratio: >60dB
- Phono Output Level: 4 mV nominal at 1 kHz, 5 cm/sec
- Line Level Output: 200 mV nominal at 1 kHz, 5 cm/sec
- Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
- Power Supply Requirements: 100-240V AC, 60 Hz
- Power Consumption: 1 W
- Dimensions (WxHxD): 420 x 117 x 340 mm
- Weight: 4.7kg
- Tonearm type: Balanced straight tonearm with detachable headshell
- Effective arm length: 223.6mm
- Overhang: 18.6mm
- Tracking error angle: <2 degrees
- Applicable cartridge weight: 12-17g
- Anti-skating range: 0-3g
- Replacement Stylus: AT-VMN95E
What's Included
- AT-VM95E phono cartridge
- AT-HS4 headshell
- Dual RCA (male) to dual RCA (male) cable with ground wire
- Counterweight
- Rubber mat
- Dust cover
- 45 RPM adapter
