• The ATW-C510 dynamic mic capsule is designed for smooth, natural vocal reproduction.
• The capsule features a cardioid pickup pattern for significant rejection of unwanted background sound and reduced feedback on stage.
• The handheld transmitter's interchangeable capsule design (with an industry-standard thread) allows you to replace the C510 capsule with an Audio-Technica capsule that’s ideal for your application and simply screw it onto the transmitter—including the ATW-C710, ATW-C4100, ATW-C6100, ATW-C3300, and ATW-C5400 capsules as well as capsules from other manufacturers.
• The transmitter's gain ranges from -10 to +20 dB and can be adjusted in 2 dB increments.
• The bright OLED screen presents comprehensive setup and operating information, including battery indicator, mute status, and operating frequency. Setup functions are menu driven via soft-touch controls, which are covered to prevent accidental changes.
• The multifunction button can be programmed to act as a mute switch or to switch to a clean backup frequency with minimal interruption in case of interference.
• The transmitter easily syncs to the receiver via infrared with a quick press on the Sync button.
• Two RF power output settings are available: the low-level setting extends battery life while the high level offers a stronger RF signal link. 
• The transmitter operates for up to 9 hours on two AA alkaline batteries and up to 9.5 hours on two rechargeable AA NiMH batteries.
• Charging terminals on the base of the transmitter work with the optional ATW-CHG3 charging dock or ATW-CHG3N networked charging dock to recharge AA NiMH batteries.
• The durable metal chassis is equipped a secure, locking battery compartment door.

• The wide 60 MHz UHF bandwidth gives you 2395 selectable frequencies to choose from for interference-free audio transmission in an increasingly congested RF environment.
• To prevent dropouts, the receiver's true-diversity reception compares incoming signals on two independent receiver circuits to ensure optimal RF quality.
• Auto-frequency scanning automatically selects the most appropriate frequency for the area in which the wireless is operating.
• Pre-coordinated frequency scan groups are available to simplify selection of usable frequencies in a multichannel wireless setup.
• The bright, dual-mode OLED display can be switched between two modes: the standard view provides continuous indication of RF signal strength, frequency, mute status, audio modulation level, and transmitter information, while the performance view highlights key metering.
• The display also shows the transmitter's battery life and mute status.
• Settings can be quickly adjusted using the control dial and BACK button located on the receiver's front panel. Settings can also be locked to prevent accidental changes.
• The BNC sockets for the two detachable antennas provide bias power to active remote antennas and other in-line RF devices.
• The ground-lift switch on the back panel helps eliminate audible hum caused by ground loops.
• A balanced XLR output and an unbalanced 1/4" output allow you to connect the receiver to a mixing board or PA system.
• The half-rack receiver chassis can be mounted alone in a standard 19" rack using the included mounting brackets and screws.

• For Presenters and Performers
• Rugged Handheld Transmitter
• ATW-C510 Dynamic Cardioid Capsule
• True-Diversity Rackmount Receiver
• 2395 Auto-Scan Frequencies
• Selectable 10/30mW RF Power
• Interchangeable Capsule Design
• Dual-Mode OLED Display
• 9.5 Hours on NiMH Batteries
• Expandable to 40 Mic Channels/330' Range

Technical Specifications

• Overall System
  
  • Operating Frequencies:
    • Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
    • Band EE1: 530.000 to 589.975 MHz (2400 frequencies)
    • Band EF1: 590.000 to 649.975 MHz (2400 frequencies)
    • Band FG1: 650.000 to 699.875 MHz (1996 frequencies)
    • Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations.
  • Minimum Frequency: Step 25 kHz
  • Modulation Mode: FM
  • Maximum Deviation:
    • ATW-T3201: ±38 kHz (THD:10%)
    • ATW-T3202: ±36 kHz (THD:10%)
  • Frequency Response:
    • ATW-T3201: 31 Hz to 15,500 Hz
    • ATW-T3202: 25 Hz to 16,700 Hz
    • Frequency response depends on attached microphone element
  • Operating Range: 100 m (328') Open range environment with no interfering signals.
  • Total Harmonic Distortion: <1.0% (at 1 kHz, ±17.5 kHz deviation)
  • Operating Temperature Range: -5° C to +45° C (23° F to 113° F)
  • Simultaneous Use: 40 Channels per band* (For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent)
• Handheld Transmitter
  
  • RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
  • Spurious Emissions: Following Federal and National Regulations
  • Microphone Capsule: Interchangable industry standard thread
  • Battery Type: Two 1.5V AA, not included
  • Battery Life:
    • High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
    • High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
    • Depending on battery type, usage, and environmental conditions.
  • Dimensions:
    • ATW-T3202 (without capsule): 193 mm (7.60") long, 37 mm (1.46") maximum diameter
    • ATW-T3202/C510: 265 mm (10.43") long, 54 mm (2.13") maximum diameter
    • ATW-T3202/C710: 271 mm (10.67") long, 50 mm (1.97") maximum diameter
  • Net Weight:
    • ATW-T3202 (without capsule): 200 g (7.1 oz), without batteries
    • ATW-T3202/C510: 330 g (11.6 oz), without batteries
    • ATW-T3202/C710: 314 g (11.1 oz), without batteries
• Body Pack
  
  • RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
  • Battery Life:
    • High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
    • High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
    • Depending on battery type, usage, and environmental conditions.
  • Battery Type Two 1.5V AA, not included
  • Dimensions:
    • 64 mm x 82 mm x 23 mm (W x D x H)
    • 2.52" x 3.22" x 0.91" (W x D x H)
  • Input Connections:
    • cH-style screw-down 4-pin connector
    • Pin 1: GND
    • Pin 2: INST INPUT
    • Pin 3: MIC INPUT
    • Pin 4: DC BIAS +5V
  • Net Weight: 102 g (3.6 oz), without batteries
  • Spurious Emissions: Following Federal and National Regulations
  • High-pass (low-freq. roll-off): 125Hz, 12dB/octave
• Receiver
  
  • Receiving System: True Diversity
  • Image Rejection: 60 dB nominal
  • RF Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
  • Maximum Output Level:
    • XLR, balanced: +14 dBV
    • 6.3 mm (1/4"), unbalanced: +8 dBV
  • Antenna Input: BNC-type, 50 ohms
  • Antenna Power: 12 V DC, 160 mA (combined)
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
  • Dimensions:
    • 210.0 mm x 191.0 mm x 43.4 mm (W x D x H)
    • 8.27" x 7.52" x 1.71" (W x D x H)
  • Weight: 1100 g (38.8 oz), without accessories

What's Included

• Audio-Technica ATW-3212/C510 3000 Series Wireless Handheld Microphone System with ATW-C510 Capsule (DE2: 470 to 530 MHz)
• Audio-Technica ATW-R3210 3000 Series Wireless Receiver (DE2: 470 to 530 MHz)
• Audio-Technica ATW-3202 3000 Series Handheld Transmitter with No Mic Capsule (DE2: 470 to 530 MHz)
• Audio-Technica ATW-C510 Interchangeable Cardioid Dynamic Microphone Capsule for ATW-T3202 Handheld Transmitter
• Audio-Technica AT8456a Quiet-Flex Microphone Stand Clamp for Wireless Transmitters
• Threaded Screw Adapter
• 2 x Flexible Antennas
• AC Adapter
• Rackmount Hardware