Product Description
ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.
The Audio-Technica ATW-1102 System 10 is a digital wireless handheld microphone system featuring an ATW-R1100 tabletop receiver. The portable system is well suited for quick setup in educational facilities, conference rooms, small venues, and houses of worship as well as web broadcast studios.
The easy-to-use system comes preconfigured at the factory, ready to operate right out of the box with no setup required. Three levels of diversity reception and automatic frequency selection provide seamless, reliable performance with clear digital audio for presenters, lecturers, clergy, and performers.
The ATW-1102 includes a handheld transmitter with an integrated hypercardioid dynamic microphone capsule. The transmitter provides up to 7 hours of continuous use with two AA batteries, at a maximum range of 100'. For setups with multiple presenters, up to 8 mic channels can operate simultaneously in the same space.
- The System 10 offers full-bandwidth, 24-bit/48 kHz digital audio with none of the audio artifacts associated with analog companding.
- The rugged handheld transmitter features an integrated dynamic microphone capsule that delivers a natural sound optimized for speech intelligibility.
- The mic's hypercardioid polar pattern focuses audio capture tightly on the subject directly in front of the mic, minimizing background noise and feedback.
- Just power up the components, and the receiver automatically seeks out a clean frequency and pairs up with the transmitter, saving you the hassle of scanning and syncing.
- While in use, the system continually monitors activity in the 2.4 GHz Wi-Fi range and automatically switches to a clean frequency to avoid interference if necessary.
Portable Receiver Chassis
- The tabletop receiver chassis features lightweight, plastic housing designed to let you stack multiple receivers on top of each other for convenience.
- The chassis' front-panel LEDs show pairing statuses and warn you if the transmitter's input level is set too high and causing distortion.
- A System ID number display indicates which transmitter is associated with a given receiver.
- Rear-panel connections include balanced XLR and unbalanced 1/4" output connections as well as an output level control.
Lightweight Handheld Transmitter
- The transmitter is housed in a lightweight, plastic chassis.
- An internal input trim control can be set—using the included screwdriver—to match the volume of your speaker or vocalist for distortion-free input.
- With just a quick press, the power switch on the transmitter doubles as a mute function. This function can be locked out to prevent an accident.
Pairing Multiple Transmitters
- With this peer-to-peer system, the transmitter can only transmit to one receiver at a time. However, up to 8 transmitters can be paired with a receiver ahead of time. This is useful in situations when you have multiple speakers, one after another, and you need to have them miked up and ready to go. All you'll have to do is turn one transmitter Off and the next one On.
- Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
- Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
- Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.
For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.
2.4 GHz Wi-Fi Band
- Unlike traditional analog wireless systems, the System 10 operates in the 2.4 GHz ISM band, away from interruptions and dropouts caused by TV and radio channel interference.
- For Presenters & Performers
- Hypercardioid Handheld Mic/Transmitter
- Triple-Diversity Tabletop Receiver
- 7-Hour AA Batteries
- Fixed Antennas
- Expandable to 8 Mic Channels/100' Range
Technical Specifications
- Overall System
- Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
- Frequency Response:
- 20 Hz to 20 kHz
- Depending on microphone type
- Operating Range: 30 m (100') typical Open range environment with no interfering signals
- Total Harmonic Distortion: <0.05% typical
- Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
- Handheld Transmitter
- RF Power Output: 10 mW
- Spurious Emissions: Following federal and national regulations
- Battery Type Two 1.5V AA (not included)
- Battery Life >7 hours (alkaline) Depending on battery type and use pattern
- Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
- Net Weight: 280 grams (9.9 oz) without batteries
- Body Pack
- RF Power Output: 10 mW
- Battery Life >7 hours (alkaline) Depending on battery type and use pattern
- Battery Type Two 1.5V AA (not included)
- Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
- Input Connections:
- Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +9V
- Net Weight 100 grams (3.5 oz) without batteries
- Spurious Emissions: Following federal and national regulations
- Receiver
- Receiving System: Diversity (frequency/time/space)
- Maximum Output Level:
- XLR, balanced: 0 dBV
- 1/4" (6.3 mm), unbalanced: +6 dBV
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
- Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
- Dimensions: 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
- Weight: 290 grams (10.2 oz)
What's Included
- Audio-Technica ATW-1102 System 10 Digital Wireless Hypercardioid Handheld Microphone System (2.4 GHz)
- Audio-Technica ATW-R1100 System 10 Digital Tabletop Wireless Receiver (2.4 GHz)
- Audio-Technica ATW-T1002 System 10 Digital Wireless Hypercardioid Handheld Microphone/Transmitter (2.4 GHz)
- Audio-Technica AT8456a Quiet-Flex Microphone Stand Clamp for Wireless Transmitters
- AC Power Adapter
