Product Description
The AT33MONO is designed specifically for use with mono vinyl records.* Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT33MONO cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records. The cartridge’s 0.65 mil conical stylus is mounted on a hard duralumin cantilever for excellent sound reproduction and dependable performance.
SPECIFICATIONS
- Frequency Response: 20-20,000 Hz
- Channel Separation: 30dB (1kHz)
- Vertical Tracking Angle: 23°
- Vertical Tracking Force: 2.3-2.7 g (2.5 g standard)
- Recommended Load Impedance: More than 100 ohms (when head amplifier is connected)
- Coil Impedance: 10Ω (1kHz)
- DC Resistance: 10Ω
- Coil Inductance: 28 µm (1kHz)
- Output Voltage: 0.35 mV (at 1 kHz, 5 cm/sec)
- Output Channel Balance: 1dB (1kHz)
- Stylus Shape: 0.65 mil conical
- Cantilever: Duralumin pipe
- Static Compliance: 20×10-6cm/dyne
- Dynamic Compliance: 6 x 10-6 cm/dyne (100 Hz)
- Mounting: Half-inch
- Dimensions: 16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D
- Body Material: Aluminium/Synthetic Resin
- Mounting Feature: Half-inch mount
- Stylus Size: Nude square shank
- Type: Dual Moving Coil
- Weight: 6.9g
What's Included
- Non-magnetic screwdriver
- 2 washers
- 2 nuts
- cartridge installation screws (13 mm × 2, 19 mm × 2)
- plastic protector
- brush
- PCOCC lead wire set
